The Avanti J-26S series is the only high performance centrifuge system you’ll ever need. Built upon benchmark performance, including high speed, low heat output, imbalance tolerance, and low noise the Avanti J-26S series has been redesigned for your ever-evolving lab and business needs. The Avanti J-26S is sustainable, easy-to-use, versatile, and safe.

High Performance
Application versatility: can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, run 24 microplates at a time, and separate live cell populations with elutriation.

Complete BioSafety* Systems
BioCertified** rotors, instruments and labware contain microbiological aerosols, while sterile filters prevent infectious materials from being expelled into the lab environment. Together, they enhance peace of mind for users and lab managers.

Dual System Rotor Recognition
Automatically detects which rotor is installed and prevents the rotor from running above its maximum-rated speed—without shutting down the run. All to ensure the safety of your lab.

Friction Reduction System
Enables quicker, quieter, more energy-efficient runs with better temperature control, which improves system reliability. High-torque, switched reluctance (SR) drive technology shortens cycle times.

Lightweight J-Lite Rotors
Consistently designed to be the most efficient rotors—for reduced run times and high g-force.

Ergonomic Design
Lower work surface for easier rotor handling. Foot pedal opens the door and improved door design swings up and out of the way.

Sustainability is Built In
Each instrument saves approximately 9.6 pounds of post-consumer materials from the landfill.

SPECIFICATIONS:

UNSPSC:	41103905
Height:	86 cm (34 in); with door open 149 cm (58.5 in)
Width:	71 cm (28 in)
Depth:	86 cm (34 in); 102 cm (40.25 in) (including air diverter extending from back panel)
Weight:	290 kg (640 lb.)
Friction Reduction System (FRS):	A mechanical rotary vane pump reduces chamber pressure to 0.25 ATM (190 mm [7.5 in] Hg)
Max Capacity Volume Range:	6 liters
Max Speed:	26,000 rpm
Maximum Heat Dissipation into Room under Steady-State Conditions:	2.0 kW (6,900 BTU/hr)
Noise Level 0.91 meters (3 feet) in Front of Centrifuge:	57 dBA
Refrigeration System:	Non-CFC, non-ozone depleting refrigerant
Rotor ID:	Automatic
Set Temperature:	-10° C to +40° C (in 1° C increments)
Set Time:	1 Min - 3 Hours, Continuous Hold
Speed Control:	± 10 rpm of set speed or 0.1%, whichever is greater
Speed Range:	100 to 26,000 rpm or equivalent RCF; 0 to 5,000 rpm for elutriation
Temperature Control:	± 2° C of set temperature (after equilibration)
Zonal Capability:	Yes
Single Tube Sample Volume Range:	1.8 - 1,000 mL
Ambient Temperature Range:	16° C to 38° C
Clearances Required:	7.6 cm (3.0 in) sides; 16.0 cm (6.25 in) rear
Door:	6.1 cm (2.4 in) thick plastic resin with steel plate
Humidity Restrictions:	< 95% (noncondensing)
Pollution Degree:	2
Rotor Chamber Diameter:	51.3 cm (20 in)
Time -- Actual Display:	Indicates run time remaining (timed run) or elapsed time (hold run)
Maximum Force at r max (g):	82,000 x g
Acceleration:	Maximum or slow
Deceleration:	Maximum, slow, or off

Availability of adapters, rotors, tubes and bottles, parts and accessories.