Meet the Avanti J- 26XP . . . a fast, efficient centrifugation solution uniquely designed to process up to 6 liters in less than 10 minutes. Teamed with a full range of rotors, adaptors and sample carriers, this system delivers the versatility you need and the efficiency you deserve. Reduce hands-on sample handling with HarvestLine System Liners; offering convenient, easy to use improvements in biosafety and prolonged storage.


SPECIFICATIONS:

UNSPSC:	41103905
Height:	86 cm (34 in); with door open 149 cm (58.7 in)
Width:	71 cm (28 in)
Depth:	86 cm (34 in); 102 cm (40.25 in) (including air diverter extending from back panel)
Weight:	290 kg (640 lb.)
Dimensions:	865 mm x 876 mm X 711 mm (34.1 in x 34.5 in. x 28 in.)
Approximate Acceleration Time:	Maximum, slow, or timed (1 to 10 min from 0 to 500 rpm)
Approximate Deceleration Time:	Maximum, slow, timed (1 to 10 min from 500 to 0 rpm), or off
Drive Cooling:	Air Cooled
Drive Type:	SR* Drive
Friction Reduction System (FRS):	A mechanical rotary vane pump reduces chamber pressure to 0.25 ATM (190 mm [7.5 in] Hg)
Max Capacity Volume Range:	6 liters
Max Speed:	26,000 rpm
Maximum Heat Dissipation into Room under Steady-State Conditions:	2.0 kW (6,900 Btu/hr)
Noise Level 0.91 meters (3 feet) in Front of Centrifuge:	< 57 dbA
Refrigeration System:	Non-CFC, non-ozone depleting refrigerant
Rotor ID:	Manual
Set Temperature:	-10° C to +40° C (in 1° C increments)
Set Time:	1 Min - 3 Hours, Hold
Speed Control:	± rpm of set speed or 0.1%, whichever is greater
Speed Range:	100 to 26,000 rpm or equivalent RCF; 0 to 5,000 rpm for elutriation
Temperature Control:	± 2° C of set temperature (after equilibration)
Zonal Capability:	No
Single Tube Sample Volume Range:	1.5 - 1,000 mL
Ambient Temperature Range:	15° C to 40° C
Clearances Required:	7.6 cm (3.0 in) sides; 16.0 cm (6.25 in) rear
Door:	6.1 cm (2.4 in) thick structural foam with steel plate
Humidity Restrictions:	< 95% (noncondensing)
Pollution Degree:	2
Rotor Chamber Diameter:	51.3 cm (20 in)
Time -- Actual Display:	Indicates run time remaining (timed run) or elapsed time (hold run)
Maximum Force at r max (g):	82,000 x g

Availability of adapters, rotors, tubes and bottles, parts and accessories, software.